Motherboard and its types | ATX, Micro ATX, LPX and Others

 Types of motherboards

 

6 Types of Motherboard Form Factor

1. ATX

 

Image Source - Google | Image By RankRed-

The ATX kind issue ab initio started commerce within the mid-1990s. The ATX board was thought-about to be revolutionary at that point because it brought tons of changes to the pc earlier.

Previously, enlargement slots came with riser cards that required to be obstructed into the board. However, with ATX there was no would like for riser cards and it conjointly reduced the house necessities.

The ATX board introduced power pins just like the 20-pin connation and different headers for air ventilation. 

 

2. Micro-ATX

 

Image Source - Google | Image By - IGN

Micro-ATX came at a time once individuals started stern for a lower-cost resolution to the ATX motherboards. The small ATX motherboard offers similar edges to its counterparts however an Associate has in nursing improved style. The dimensions of the board are additionally smaller than the Full-sized motherboard which helps in reducing the prices. The smaller size was achieved by reducing the quantity of I/O slots.

3. LPX

 

Image Source - Google | Image By wikipedia

ATX and Micro-ATX area units are the foremost in style kinds of motherboards. However, there's a non-standard proprietary type stated as Mini-LPX and LPX.

These area units' low-profile extended boards are found in low-profile cases. The enlargement boards run aboard the motherboard; but, you'd have to be compelled to use enlargement cards with a riser card arrangement.

This arrangement ends up in a smaller case however comes at a limitation of growth slots. The advantage of LPX boards is the integration of sound and video into them. Wherever the LPX falls short is the poor cooling and also the inability to upgrade.

4. Mini-ITX

 

Image Source - Google | Image By - buildcomputers.net

Mini-ITX boards are seventeen cm by seventeen cm and were first introduced in 2001. The merchandise was launched as a distinct segment product and geared toward smaller laptop systems.

The boards need low power to run and don't have any fans for cooling. This created it ideal for pairing it up with theatre systems. 

The mini ITX board comes with four mounting holes permitting it to simply slot in ATX, micro-ATX, and different styles of cases. Several older ITX boards used riser cards for enlargement slots, however, the newer style has incorporated one receptacle.

5. NLX

 

Image Source - Google | Image By - Alan computer International

The NLX board was introduced within the late Nineteen Nineties as an answer to providing support for larger cases, video cards, memory modules, etc. The board has additional choices for repair and upgrade creating it higher than LPX. Existing LPX systems square measure is currently being reborn to NLX because it is well matched to mass-market PCs.

 

6. BTX

 

Image Source - Google | Image By -  ANANDTECH

The BTX type issue is additionally called balanced technology extended motherboards. It’s a whole amendment from the ATX boards.

Technologies like USB a pair of.0 and PCIe were the rationale why BTX boards were created in the 1st place. The BTX boards square measure smaller than micro-ATX boards and have an improved element placement, particularly with back panel I/O controllers.

The BTX pushed the business towards tower-sized systems that supply additional system slots. The advantage of a BTX system is that the method it uses flows to chill the system.

The memory and enlargement slots placements square measure switched with one another in order that the most parts like processor, chipset, and additional get the air it wants. This reduces the requirement for fans to successively reduce the noise levels related to additional fans.

The major disadvantage of BTX boards is the indisputable fact that developers and makers square measure slow to adopt this technology. The choices to upgrade cases isn't doable since a BTX board can ne'er match associate degree ATX full tower case and contrariwise.

 How Do I Know If a Motherboard Will Fit In My Case?

There square measure 2 forms of type factors that square measure typically used, ATX and Micro-ATX. ATX motherboards square measure full-sized boards whereas Micro-ATX square measure some inches shorter in dimensions. This implies that an associate ATX board will work a standard case or a tower case whereas a Micro-ATX fits during mid-sized to small-sized cases.

The easiest thanks to shrewdness a motherboard can slot in your case are to ascertain the specifications of your case. If your case features a fitting capability for a full-sized ATX board then purchase a full-sized board. If the case is mid-sized to tiny then you can't work for an associate ATX board and can need a Micro-ATX board.

 What Advantages Does ATX Have Over Micro-ATX?

ATX board options a lot of extra selections to upgrade compared to Micro-ATX. usually this can be often as a result of ATX boards having extra space or house that square measure assigned for various components like extra enlargement slots. You’ll together notice extra power headers for connecting all types of cooling selections like fans and water coolers.

Can I Fit a Micro-Atx Motherboard In an ATX Case?

The best factor for a couple of micro-ATX boards is that the incontrovertible fact that it's backward compatible with its counterpart ATX boards. There are mounting points on a micro-ATX board that resembles those subsets gift on the Associate in Nursing ATX board. This permits users to simply screw the micro-ATX board in the Associate in Nursing ATX case.

Will an ATX motherboard fit in a Mini Tower?

Mini tower case is incredibly little in dimensions and can't accommodate a full-sized motherboard. Associate ATX board will solely slot in a mid-sized or a full-sized case.

The mini-tower will match a seventeen x seventeen cm motherboard which specification is simply consummated by a mini.

What Are The 2 Main Components of a Motherboard?

A motherboard incorporates a ton of elements like audio capacitors, VRM heat sinks, PCIe slots, and more. However, their area unit many main elements of a motherboard that help run a system.

The first one may be a CPU, the part wherever all the process power comes from. The opposite one is memory or RAM; this permits the system to scan and write the information from the temporary memory. While not these 2 parts, one cannot run a system.

Conclusion

In order for users to see the speed of the system, that they're attempting to build; the correct form of the motherboard is a necessity. The most issue to seem out for is how compatible a motherboard is with different components of the system. If you would like to possess 64GB of RAM in your system then that narrows down your option to Associate in Nursing ATX board since the Associate in Nursing ATX board has the capability to carry over 64GB of RAM.

 

Berbagi :